Description
LightDims Original Strength – Light Dimming LED – Features & Prices in Saudi Arabia :
LightDims Original Strength – Light Dimming LED Covers and Light Dimming Sheets for Routers, Electronics and Appliances and More. Dims 50-80% of Light, in Minimal Packaging.
Brand
LIGHTDIMS
Light Type
LED
Wattage
50 watts
Light Color
Cool Daylight White
Voltage
240 Volts
Unit Count
1 Count
Number of Items
1
Material
plastic
Size
1 Count (Pack of 1)
Indoor/Outdoor Usage
Outdoor, Indoor
Controller Type
Push Button
Style
Electronic
Finish Type
gloss
Manufacturer
LIGHTDIMS
Part Number
LD009
Item Weight
0.1 ounces
Product Dimensions
0.01 x 4.09 x 7.87 inches
Item model number
LD009
Is Discontinued By Manufacturer
No
Color
Black
Finish
gloss
Item Package Quantity
1
Type of Bulb
led
Batteries Included?
No
Batteries Required?
No
Test video – LightDims Original Strength – Light Dimming LED :
Product highlights :
Questions & Answers – LightDims Original Strength – Light Dimming LED :
Technical specifications – LightDims Original Strength – Light Dimming LED :
Brand
LIGHTDIMS
Light Type
LED
Wattage
50 watts
Light Color
Cool Daylight White
Voltage
240 Volts
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
K. B (verified owner) –
Works – They work very well and comes with a bunch of sizes. They’re a little hard to take off the sheet and you have to layer a couple but they definitely work!
K. F (verified owner) –
Does what it’s supposed to, but it’s REALLY hard to apply – They’re really hard to get off the sticker sheet without damaging the edges of the stickers. The small stickers that you get the most of are the right size for the LEDs I needed to cover, but they’re still really small. Fortunately there were a lot of the stickers so I just didn’t care that I had to throw out a couple that I either bent too much trying to get off the sheet or installed wrong and damaged removing them trying to reapply. One sticker was enough to take a blue LED from annoyingly bright to “I’m pretty sure that’s on but I have to kinda look twice,”
C. P (verified owner) –
Works as expected and more – Bought it to cover a power button with bright light that cannot be turned off. The power button also doubled as a fingerprint scanner for Windows Hello. I was expecting to sacrifice the fingerprint scanner as a tradeoff to dim the power button light. But to my surprise the fingerprint scanner still works well even with a lightdim sticker on it.
C. P (verified owner) –
Works as expected and more – Bought it to cover a power button with bright light that cannot be turned off. The power button also doubled as a fingerprint scanner for Windows Hello. I was expecting to sacrifice the fingerprint scanner as a tradeoff to dim the power button light. But to my surprise the fingerprint scanner still works well even with a lightdim sticker on it.
R. G (verified owner) –
They’re like little secret sunglasses for each annoying light in my bedroom! – I just spent a quick 5 minutes sticking them on all the little lights in my bedroom for a perfect level of dimness. At first I thought, Oh no! I can still see the light through the sticker! But then I turned off the lights in the room and I can see that the lights are indeed so much dimmer but I can still barely see them in the dark. This is kind of a nice feature since they are like little runway lights to find my way around safely at night. Plus unlike black tape you can still find the button when you need it, these stickers are neat. They come in a nice variety of shapes and sizes to fit all of my needs. The red light on the space heater no longer lights up the entire room. And same for the green light on the fan the blinking light on the computer the yellow light on the monitor and the green light on the printer not to mention the room illuminating flashing green light on the electric toothbrush in the other room. You solved a nightly problem for me! Thanks!
K. M (verified owner) –
Excellent, but when installing, avoid touching the back (sticky) side – These work GREAT! Perfect for taming the bright LEDs that have been plaguing my life, in more than one room. But from the gitgo, after having read some critical reviews by others it was clear to me that some care was needed to install the stickers so that they would hold (and they have!). Specifically, first clean your target. (I wiped mine with 90% rubbing alcohol.) Next, plan ahead, to avoid touching any part of the back (sticky) side of the piece you’ll be using. (I picked up mine with one end of small scissors or a tooth pick.) If the piece is longer than you need, hold the excess length with your fingers; then put the sticker in place, without pressing down any part(s) you’ve held; then cut off those parts and push the remainder in place. Works beautifully! And what a relief; for my eyes, the stickers dim LEDs to the perfect level.
I. C (verified owner) –
Good at reducing the very bright light from various electronics – They are a good purchase for the price. Getting the dots off to install was a bit of a challenge. I have rolled up a portion of the edge on each one I have used so far. I also really want the light very blacked out so I had to use two dots on every light but that is just a personal choice.
O. T (verified owner) –
Require multiple layers – I like what they overall do. Some lights you have to layer. I wish there were more of the bigger stickers. I don’t have much use for all the little ones.
I. C (verified owner) –
Good at reducing the very bright light from various electronics – They are a good purchase for the price. Getting the dots off to install was a bit of a challenge. I have rolled up a portion of the edge on each one I have used so far. I also really want the light very blacked out so I had to use two dots on every light but that is just a personal choice.
K. B (verified owner) –
Works – They work very well and comes with a bunch of sizes. They’re a little hard to take off the sheet and you have to layer a couple but they definitely work!
K. M (verified owner) –
Excellent, but when installing, avoid touching the back (sticky) side – These work GREAT! Perfect for taming the bright LEDs that have been plaguing my life, in more than one room. But from the gitgo, after having read some critical reviews by others it was clear to me that some care was needed to install the stickers so that they would hold (and they have!). Specifically, first clean your target. (I wiped mine with 90% rubbing alcohol.) Next, plan ahead, to avoid touching any part of the back (sticky) side of the piece you’ll be using. (I picked up mine with one end of small scissors or a tooth pick.) If the piece is longer than you need, hold the excess length with your fingers; then put the sticker in place, without pressing down any part(s) you’ve held; then cut off those parts and push the remainder in place. Works beautifully! And what a relief; for my eyes, the stickers dim LEDs to the perfect level.
H. M (verified owner) –
GREAT IDEA – TOTALLY RECOMMEND THIS PRODUCT
H. M (verified owner) –
GREAT IDEA – TOTALLY RECOMMEND THIS PRODUCT
K. F (verified owner) –
Does what it’s supposed to, but it’s REALLY hard to apply – They’re really hard to get off the sticker sheet without damaging the edges of the stickers. The small stickers that you get the most of are the right size for the LEDs I needed to cover, but they’re still really small. Fortunately there were a lot of the stickers so I just didn’t care that I had to throw out a couple that I either bent too much trying to get off the sheet or installed wrong and damaged removing them trying to reapply. One sticker was enough to take a blue LED from annoyingly bright to “I’m pretty sure that’s on but I have to kinda look twice,”
R. G (verified owner) –
They’re like little secret sunglasses for each annoying light in my bedroom! – I just spent a quick 5 minutes sticking them on all the little lights in my bedroom for a perfect level of dimness. At first I thought, Oh no! I can still see the light through the sticker! But then I turned off the lights in the room and I can see that the lights are indeed so much dimmer but I can still barely see them in the dark. This is kind of a nice feature since they are like little runway lights to find my way around safely at night. Plus unlike black tape you can still find the button when you need it, these stickers are neat. They come in a nice variety of shapes and sizes to fit all of my needs. The red light on the space heater no longer lights up the entire room. And same for the green light on the fan the blinking light on the computer the yellow light on the monitor and the green light on the printer not to mention the room illuminating flashing green light on the electric toothbrush in the other room. You solved a nightly problem for me! Thanks!
O. T (verified owner) –
Require multiple layers – I like what they overall do. Some lights you have to layer. I wish there were more of the bigger stickers. I don’t have much use for all the little ones.