Description
Microjig Grr-Ripper GR-100 3D Table Saw Pushblock, – Features & Prices in Saudi Arabia :
Microjig Grr-Ripper GR-100 3D Table Saw Pushblock, Yellow
Manufacturer
MICROJIG, Inc.
Part Number
GR-100
Item Weight
2 pounds
Product Dimensions
7 x 4.5 x 4.5 inches
Country of Origin
Taiwan
Item model number
GR-100
Is Discontinued By Manufacturer
No
Color
Yellow
Style
Base
Material
plastic
Pattern
Pushblock
Item Package Quantity
1
Number of Handles
1
Included Components
(1) Illustrated Instructions, (1) GRR-RIPPER GR-100
Batteries Included?
No
Batteries Required?
No
Warranty Description
Extended 3-Year Manufacturer’s Warranty from Authorized Dealers Only
Test video – Microjig Grr-Ripper GR-100 3D Table Saw Pushblock, :
Product highlights :
Questions & Answers – Microjig Grr-Ripper GR-100 3D Table Saw Pushblock, :
Technical specifications – Microjig Grr-Ripper GR-100 3D Table Saw Pushblock, :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
![[Pack of 100] Single Use Disposable Blue Face Mask](/wp-content/uploads/2023/05/51k8JL9QgbL-300x225.jpg)
Z. I (verified owner) –
Don’t Let the Complex Look Intimidate You!!! Safety First!! – I must admit that this product has been in my sights for quite some time as a weekend woodworker and what I perceived as complexity is merely a matter of familiarity. Any power tool like a router, table saw or high rpm cutting tool is very dangerous and one wrong move can be catastrophic. I always thought I was ok with my generic push stick and fortunately being very mindful of safety I have not had any accidents. However recently I have read MANY stories of people losing appendages because of improper safety, and this product seems to come up again and again from people wishing they had used it. I purchased this when it went on sale since it was about $20 less than normal retail for my own piece of mind. It took me a couple of days to open the box and consume the instructions. I took the time to understand the ins & outs of all features and put it to work. I WILL NEVER work without this product again and as a matter of fact, will be expanding the accessories for it. I just feel safer using it on my table saw and router table. I am still careful but have a better sense of ease while using it. Nothing is foolproof, but the more barriers we can put up as woodworkers the more injury is less likely. I completely recommend this product for anyone using high rpm table-based cutting tools. I may get another one for large pieces of stock.
I. F (verified owner) –
Do you use a table saw? Do you enjoy all of your fingers? This will protect them. – It’s plastic, that’s true. But it’s thick, heavy, high-quality plastic (and it’s yellow to boot, which studies have shown increases the strength of any material). It’s beautifully engineered, fits together well, and does exactly what it claims to do.
K. Z (verified owner) –
An absolute must have in your shop. – This has been a true game changer for my table saw. I wish these would come standard with the saw instead of the cheap push sticks that you actually get. Do not hesitate, buy one or two and you will be happy you did.
H. F (verified owner) –
Safe – As I’m very old school, I was very used to using a radial arm saw for everything. A table saw scared me to death after a few very bad experiences. But after using the microjig a few times I was very confident in my abilities and felt very safe. No more work about cutting my fingers off. I love this tool.
Z. T (verified owner) –
Don’t Use Your Table Saw Without This! – This is a must-have accessory for safely using a table saw. Won’t rip smaller pieces without it!
J. K (verified owner) –
This is all about safety, and the Gripper enhances that. – They call it a “Micro” jig for a reason. This is suitable for cutting small pieces and doing a lot of them. Since you have to completely set the jig up for every cut you make it is a lot of setup when you are making only one cut. Also you can only raise the blade a little bit so it sneaks in under the “roof” of the push block. I like my blade raised up higher so when it enters the wood it is pulling the stock down onto the table saw not right at you.
K. Z (verified owner) –
An absolute must have in your shop. – This has been a true game changer for my table saw. I wish these would come standard with the saw instead of the cheap push sticks that you actually get. Do not hesitate, buy one or two and you will be happy you did.
J. K (verified owner) –
This is all about safety, and the Gripper enhances that. – They call it a “Micro” jig for a reason. This is suitable for cutting small pieces and doing a lot of them. Since you have to completely set the jig up for every cut you make it is a lot of setup when you are making only one cut. Also you can only raise the blade a little bit so it sneaks in under the “roof” of the push block. I like my blade raised up higher so when it enters the wood it is pulling the stock down onto the table saw not right at you.
Z. T (verified owner) –
Don’t Use Your Table Saw Without This! – This is a must-have accessory for safely using a table saw. Won’t rip smaller pieces without it!
Z. I (verified owner) –
Don’t Let the Complex Look Intimidate You!!! Safety First!! – I must admit that this product has been in my sights for quite some time as a weekend woodworker and what I perceived as complexity is merely a matter of familiarity. Any power tool like a router, table saw or high rpm cutting tool is very dangerous and one wrong move can be catastrophic. I always thought I was ok with my generic push stick and fortunately being very mindful of safety I have not had any accidents. However recently I have read MANY stories of people losing appendages because of improper safety, and this product seems to come up again and again from people wishing they had used it. I purchased this when it went on sale since it was about $20 less than normal retail for my own piece of mind. It took me a couple of days to open the box and consume the instructions. I took the time to understand the ins & outs of all features and put it to work. I WILL NEVER work without this product again and as a matter of fact, will be expanding the accessories for it. I just feel safer using it on my table saw and router table. I am still careful but have a better sense of ease while using it. Nothing is foolproof, but the more barriers we can put up as woodworkers the more injury is less likely. I completely recommend this product for anyone using high rpm table-based cutting tools. I may get another one for large pieces of stock.
H. F (verified owner) –
Safe – As I’m very old school, I was very used to using a radial arm saw for everything. A table saw scared me to death after a few very bad experiences. But after using the microjig a few times I was very confident in my abilities and felt very safe. No more work about cutting my fingers off. I love this tool.
P. H (verified owner) –
A little cumbersome – This is well made and very sturdy. I find it a little bit of a pain to use compared to a push stick because you have to set the grippers to miss the sawblade when working close to the fence. That is more me than the pushblock. It does keep your hand away from the blade and is sturdy so it has its place in my shop
I. F (verified owner) –
Do you use a table saw? Do you enjoy all of your fingers? This will protect them. – It’s plastic, that’s true. But it’s thick, heavy, high-quality plastic (and it’s yellow to boot, which studies have shown increases the strength of any material). It’s beautifully engineered, fits together well, and does exactly what it claims to do.
P. H (verified owner) –
A little cumbersome – This is well made and very sturdy. I find it a little bit of a pain to use compared to a push stick because you have to set the grippers to miss the sawblade when working close to the fence. That is more me than the pushblock. It does keep your hand away from the blade and is sturdy so it has its place in my shop